Honeywell Xenon Ultra 1962h - Trigger Timing

Xenon Ultra 196X Series User Guide 83
Trigger Number
This sets the number of trigger presses required to activate the Trigger Toggle
Mode.
Trigger Timing
This sets the timing of the trigger presses in order to qualify as a trigger toggle,
rather than a regular trigger press. After scanning the Trigger Timing barcode, set
the time-out duration (from 50-2,000 milliseconds) by scanning digits from the
Programming Chart, beginning on page 309, then Save. Default = 400ms.
Trigger Toggle - Image Capture
Trigger Toggle - Centering
2 Quick Triggers
3 Quick Triggers
4 Quick Triggers
Trigger Timing