Xenon Ultra 196X Series User Guide 79
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a
good read. Default = High for 196xg/196xli, Low for 196xh scanners.
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scanner emits
on a good read. Default = Medium.
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner
emits when there is a bad read or error. Default = Razz.
* Low
Medium
* High
Off
Low (1600 Hz)
* Medium (2700 Hz)
High (4200 Hz)
* Razz (250 Hz)
To Next Page
Loading...
