Xenon Ultra 196X Series User Guide 149
Extraction Code ID
Select 1D barcode symbology the barcodes to be collated. Scan the Extract Code
ID barcode and then scan a digit (1-9) barcode from the Programming Chart,
beginning on page 309, then Save.
Extraction Separator
This sets the separator to be used between each barcode. Scan the Extract
Separator barcode below, and then scan a digit (1-9) barcode from the
Programming Chart, beginning on page 309, then Save.
Extraction Delay
An extract delay of up to 5000 milliseconds (in 5ms increments) may be placed
between the transmission of each barcode in the message string. Scan the
Extraction Delay barcode below, the scan the number of 5ms delays, and the Save
barcode from the Programming Chart, beginning on page 309.
Extract Code ID
Extract Separator
Extraction Delay
To Next Page
Loading...
