Xenon Ultra 196X Series User Guide 205
Character Replacements on page 302), and scan the value and the Save barcode
from the Programming Chart, beginning on page 309. The data characters should
then appear properly.
MaxiCode
< Default All MaxiCode Settings >
MaxiCode On/Off
MaxiCode Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 152) for additional information. Minimum and Maximum
lengths = 1-150. Minimum Default = 1, Maximum Default = 150.
Data Matrix Code Page
On
* Off
Minimum Message Length
Maximum Message Length
To Next Page
Loading...
