Xenon Ultra 196X Series User Guide 43
Access Point Communication and Scanning
The following feedback is provided by the Access Point (blue LED) and indicates
communication and scanning status.
Base Communication and Scanning
The following feedback is provided by the base and indicates communication and
scanning status.
Note: While Battery-free supercapacitor scanners are seated in the base, the LED status is
Off.
Base Power Communication Indicator
To display the power indicator on a base or an Access Point, scan the Base Power
Communication Indicator On barcode. To turn off the power indicator, scan the
Off barcode. Default = On.
LED Communication Condition
Off USB suspend
On continuously Power on, system idle
Short blinks in multiple pulses. Occurs while
transferring data to/from the RF module or
the Host port.
Receiving data
LED Communication Condition
Off USB suspend
Red LED Blinking Power on, system idle (without
connected scanner)
Green LED Blinking Power on, system idle (with
connected scanner)
Green LED short blinks in multiple pulses.
Occurs while transferring data to/from the RF
module or the Host port.
Receiving data
* Base Power Communication
Indicator On
Base Power Communication
Indicator Off
To Next Page
Loading...
