Xenon Ultra 196X Series User Guide 57
Flexible Power Management
If you are experiencing network performance issues, and suspect the scanner is
interfering with other devices, you can turn down the power output of the scanner.
This reduces the range between the scanner and a base or an Access Point as
shown in the following illustration:
Scan one of the barcodes below to set the scanner’s power output to Full Power
(100%), Medium Power (35%), Medium Low Power (5%), or Low Power (1%).
Default = Full Power.
For Bluetooth Class 1 operation, use Full Power.
For Bluetooth Class 2 operation, use Medium Power or lower.
For BLE operation, use Medium Power.
802.11
LAN
Reduced
Power
Scanner
Full
Power
* Full Power
Medium Power
Medium Low Power
Low Power
To Next Page
Loading...
