Xenon Ultra 196X Series User Guide 55
Note: When the scanner is in power down mode, press the trigger to power the unit back up.
There will be a set of power up beeps and a delay of up to a few seconds for the radio
to join. The scanner will then be ready to use.
Power Save Mode
Note: Power Save Mode only applies to Xenon Ultra battery-free scanners.
When Power Save Mode is Enabled, the scanner will go into sleep mode. Default =
Disabled.
Note: When the scanner is in power save mode, press the trigger to power the unit back up.
There will be a delay of up to two seconds for the radio to join. The scanner will then
be ready to use.
0 seconds
200 seconds
400 seconds
900 seconds
* 3600 seconds
7200 seconds
* Disabled
Enabled
To Next Page
Loading...
