Honeywell Xenon Ultra 1962h - Low Power Alerts; Low Power Alert Range; Low Power Alert Flash Number

Xenon Ultra 196X Series User Guide 45
Low Power Alerts
Low power alerts allow you to customize battery LED to flash in different patterns
when the charge level is low. Use the barcodes that follow to customize the settings
for the power range being configured, the number of flashes per alert, the interval
between flashes, the number of alerts, and the interval between alerts. The beeper
can also be set to silent, or to sound with the flash patterns.
Low Power Alert Range
Set the power range that will trigger a low power alert. Default = 10%.
Low Power Alert Flash Number
You can program the battery-free scanner’s LEDs to flash up to 9 times for the low
power alert. If the Low Power Alert Beep (page 46) is on, a double beep will sound
with each flash. To set the number of low power flashes, scan the barcode below
and then scan a digit (1-9) barcode from the Programming Chart, beginning on
page 309, then Save. Default = 3 flashes.
*Low Power Alert 10%
Low Power Alert 30%
Low Power Alert 30%
Low Power Alert Flash Number