Xenon Ultra 196X Series User Guide 125
Step 1. Scan the Clear One Prefix or Clear One Suffix symbol.
Step 2. Determine the 2 digit hex value from the Symbology Chart (included in
the Symbology Charts, beginning on page 295) for the symbology from
which you want to clear the prefix or suffix.
Step 3. Scan the 2 digit hex value from the Programming Chart, beginning on
page 309 or scan 9, 9 for all symbologies.
Your change is automatically saved.
Add a Carriage Return Suffix to All Symbologies
Scan the following barcode if you wish to add a carriage return suffix to all
symbologies at once. This action first clears all current suffixes, then programs a
carriage return suffix for all symbologies.
Activate Defaults and Add CR Suffix
To reset to custom/factory default settings and add a carriage return after the
barcode, scan the Activate Defaults and Add CR Suffix barcode.
Prefix Selections
Add CR Suffix
All Symbologies
Activate Defaults and Add CR Suffix
Add Prefix
Clear One Prefix
Clear All Prefixes
To Next Page
Loading...
