204 Xenon Ultra 196X Series User Guide
Direct Part Marking Decoding
If you are having trouble reading Direct Part Marking (DPM) barcodes, scan
Dotpeen DPM Decoding for Dotpeen codes or scan Reflective (Etched) DPM
Decoding for reflective (etched) codes
. Default = Disable DPM Decoding.
Data Matrix Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 152) for additional information. Minimum and Maximum
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see ISO 2022/ISO 646
Dotpeen DPM Decoding
* Disable DPM Decoding
Reflective (Etched) DPM
Decoding
Minimum Message Length
Maximum Message Length
To Next Page
Loading...
