Xenon Ultra 196X Series User Guide 13
Verifone
®
Ruby Terminal
Scan the following Plug and Play code to program the scanner for a Verifone Ruby
terminal. This barcode sets the baud rate to 1200 bps and the data format to 8 data
bits, mark parity bit, 1 stop bit. It also adds a line feed (LF) suffix and programs the
following prefixes for each symbology:
Gilbarco
®
Terminal
Scan the following Plug and Play code to program the scanner for a Gilbarco
terminal. This barcode sets the baud rate to 2400 bps and the data format to 7 data
bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs
the following prefixes for each symbology:
High Speed USB On
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
Verifone Ruby Settings
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Gilbarco Settings
To Next Page
Loading...
