170 Xenon Ultra 196X Series User Guide
GS1-128 Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 152) for additional information. Minimum and Maximum
lengths = 1-80. Minimum Default = 1, Maximum Default = 80.
GS1 Digital Link
Per the Sunrise 2027 initiative, Honeywell has created a setting to convert Web URI
barcodes (i.e., QR Code, Data Matrix) into GS1 element strings to be easily read by
most host systems. To create a GS1 element string, first scan the GS1 Digital Link
barcode and then the Web URI barcode. Default = Off.
Note: Currently the only Web URI barcodes supported are QR Code and Data Matrix
barcodes.
Telepen
<Default All Telepen Settings>
Telepen On/Off
Minimum Message Length
Maximum Message Length
GS1 Digital Link
*Off
On
To Next Page
Loading...
