Xenon Ultra 196X Series User Guide 91
Streaming Presentation Mode
When in Streaming Presentation mode, the scan illumination remains on all the
time to continuously search for barcodes. Two modes are available, Normal and
Enhanced. Normal mode offers good scan speed and the longest working ranges
(depth of field). Enhanced mode will give you the highest possible scan speed but
slightly less range than Normal mode. Enhanced mode is best used when you
require a very fast scan speed and don’t require a long working range.
When using Preferred Symbology (page 99), a lower priority symbol must be
centered on the aiming pattern to be read in Streaming Presentation Mode.
Note: If you are using an USB base, it must have an external power supply plugged into the
aux port for Streaming Presentation to work properly.
Streaming Presentation In-Stand
This option is available when using In-Stand Sensor Mode, page 89. You may
program a specific Streaming Presentation Mode for in-stand scanning, and a
Manual Trigger mode for out-of-stand scanning. To do this, you must first scan the
preferred Streaming Presentation mode (Normal or Enhanced), then scan the
Manual Trigger mode (Normal or Enhanced) you want to use.
Hands Free Time-Out
The Scan Stand and Presentation Modes are referred to as “hands free” modes. If
the scanner’s trigger is pulled when using a hands free mode, the scanner changes
to manual trigger mode. You can set the time the scanner should remain in manual
trigger mode by setting the Hands Free Time-Out. Once the time-out value is
reached, (if there have been no further trigger pulls) the scanner reverts to the
original hands free mode.
CodeGate On
Out-of-Stand
Streaming Presentation
Mode - Normal
Streaming Presentation
Mode - Enhanced
To Next Page
Loading...
