14 Xenon Ultra 196X Series User Guide
Honeywell Bioptic Aux Port
Scan the following Plug and Play code to program the scanner for a Honeywell
bioptic scanner auxiliary port configuration. This barcode sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
®
Aux Port
Scan the following Plug and Play code to program the scanner for a Datalogic
Magellan auxiliary port configuration. This barcode sets the baud rate to 9600 bps
and the data format to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Terminal
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf
terminal. This barcode sets the baud rate to 9600 bps and the data format to 8 data
bits, no parity, 1 stop bit.
Honeywell Bioptic Settings
Datalogic Magellan Settings
Wincor Nixdorf Terminal Settings
To Next Page
Loading...
