6 Xenon Ultra 196X Series User Guide
Connect the Cordless Device
Note: If you are charging the scanner using the USB cable, the current available for
charging is reduced and charge times are increased. Charging via the power supply
or the BC1.2 charge port is faster.
1. Plug the power supply in the bottom of the base.
2. Plug the power supply into a standard wall outlet.
3. Plug the communication cable in the bottom of the base.
4. Plug the communication cable to the host.
5. Place the scanner into the base. The scanner will automatically link to the base.
Presentation CCB
Horizontal CCB
Presentation CCB
Horizontal CCB
To Next Page
Loading...
