Xenon Ultra 196X Series User Guide 169
buffers Code 128 barcodes until it reads a Code 128 barcode that does not have
the append trigger. The data is then transmitted in the order in which the barcodes
were read (FIFO). Default = Off.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see ISO 2022/ISO 646
Character Replacements on page 302), and scan the value and the Save barcode
from the Programming Chart, beginning on page 309. The data characters should
then appear properly.
GS1-128
<Default All GS1-128 Settings>
GS1-128 On/Off
On
* Off
Code 128 Code Page
* On
Off
To Next Page
Loading...
