158 Xenon Ultra 196X Series User Guide
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see ISO 2022/ISO 646
Character Replacements on page 302), and scan the value and the Save barcode
from the Programming Chart, beginning on page 309. The data characters should
then appear properly.
Suppress Code 39
It is recommended not to mix Code 39 barcodes with Codablock A barcodes,
however if you need to scan Code 39 and Codablock A barcodes at the same time,
scan the Do Not Suppress Code 39 barcode. Default = Suppress Code 39.
* Full ASCII Off
Code 39 Code Page
* Suppress Code 39
Do Not Suppress Code 39
To Next Page
Loading...
