Xenon Ultra 196X Series User Guide 69
4. If your device does not automatically pair with the scanner, a PIN is displayed.
This PIN must be scanned within 60 seconds. Quickly scan the Bluetooth PIN
Code below and then scan the appropriate numeric barcodes from the
Programming Chart, beginning on page 309, then Save.
Virtual Keyboard
Once your scanner has been connected directly to an iPad, smart phone, or laptop,
you can toggle the virtual keyboard on your device with a quick double pull of the
scanner trigger.
Bluetooth HID Keyboard Disconnect
If your scanner has been connected directly to an iPad, smart phone, or laptop, you
must disconnect it in order to once again communicate with the base or Access
Point. Scan the Bluetooth HID Keyboard Disconnect barcode to unlink the
scanner from the currently linked host. Scan the linking barcode on the base or
Access Point to relink the scanner.
Bluetooth Serial Port - PCs/Laptops
Scanning the Non-Base BT Connection barcode below unlinks your scanner and
puts it into a discoverable state. Once the scanner searches for and connects with
a Bluetooth host, the scanner stores the connection to the host device address and
switches virtual COM ports. This allows the scanner to automatically relink to the
host if the connection is lost.
Bluetooth PIN Code
Bluetooth HID Keyboard Disconnect
Non-Base BT Connection
To Next Page
Loading...
