Honeywell Xenon Ultra 1962h - Page 283

264 Xenon Ultra 196X Series User Guide
Code 128 Default All Code 128
Settings
128DFT 167
Off 128ENA0 167
*On 128ENA1 167
ISBT Concatenation *Off ISBENA0 167
On ISBENA1 167
Code 128 Redundancy Range (0 - 10) *0 128VOT## 168
Code 128 Message Length Minimum (0 - 80) *0 128MIN## 168
Maximum (0 - 80) *80 128MAX## 168
Code 128 Append On 128APP1 168
*Off 128APP0 168
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 169
GS1-128 Default All GS1-128 Settings GS1DFT 169
*On GS1ENA1 169
Off GS1ENA0 169
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 170
Maximum (0 - 80) *80 GS1MAX## 170
GS1 Digital Link GS1 Digit Link GS1DLE1 170
*Off GS1DLE0 170
Telepen Default All Telepen
Settings
TELDFT 170
*Off TELENA0 170
On TELENA1 170
Telepen Output *AIM Telepen Output TELOLD0 171
Original Telepen Output TELOLD1 171
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 171
Maximum (1 - 60) *60 TELMAX## 171
UPC-A Default All
UPC-A Settings
UPADFT 172
Off UPBENA0 172
*On UPBENA1 172
UPC-A Check Digit Off UPACKX0 172
*On UPACKX1 172
UPC-A Number System Off UPANSX0 172
*On UPANSX1 172
UPC-A 2 Digit Addenda *Off UPAAD20 173
On UPAAD21 173
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page