HP 4155A Programmer's Guide

HP 4155A/4156A SCPI Programming
Programming: Measurement Execution
Line Number Description
10 Assigns I/O path to control HP 4155A/4156A.
30 Loads measurement setup data from diskette le SWP1.MES .
40 The standby units specied in setup data start to output the standby
value.
50 Executes measurement.
60 to 70 Waits for completion of measurement. After measurement, standby units
output the standby value.
80 Stores measurement data onto a diskette.
100 Loads another measurement setup data from diskette le SWP2.MES .
This setup data cannot change which units are the standb
y units.
110 Executes measurement.
120 to 130 Waits for completion of measurement. After measurement, standby units
output the standby value.
140 Standby units stop standby output and change to idle state.
150 Stores measurement data onto a diskette.
4-19

HP 4155A Specifications

General

Brand	HP
Model	4155A
Category	Measuring Instruments
Language	English