Control from External Computer
This section describes how to control the HP 4155A/4156A from a program
that is running on an external computer:
๎
Downloading a program to HP 4155A/4156A.
๎
Uploading a program from HP 4155A/4156A.
๎
Controlling execution of a HP 4155A/4156A program.
Before executing a program on external computer to control HP
4155A/4156A, do as follows:
1. Set the \
HP 4155A/4156A is
" ๎eld on the SYSTEM: MISCELLANEOUS
page to NOT SYSTEM CONTROLLER.
2. Connect an HP-IB cable from the external computer to the HP-IB connector
on rear panel of HP 4155A/4156A.
1-35
To Next Page
Loading...
Need help?
General
