HP 4155A Programmer's Guide

Using HP Instrument BASIC
IBASIC Basic Operation Tasks
To Save Program
1. Conrm your HP 4155A/4156A is in the following status:
 the screen is \All IBASIC" screen or \IBASIC Status" screen.
 a program is not executing.
 another command is not executing.
 Editor is not running.
2. Insert a 3.5 inch diskette into the built-in diskette drive.
3. Select
NNNNNNNNNNNNNNNNNNNNNNN
SAVE "" secondary softkey.
4. Type in name of le to which you want to save program.
If the le already exists on the diskette,
NNNNNNNNNNNNNN
SAVE cannot be used. If you want
to overwrite an existing le, select
NNNNNNNNNNNNNNNNNNNNNNN
RE-SAVE secondary softkey instead of
NNNNNNNNNNNNNN
SAVE secondary softkey in the previous step.
5. Press 4
Enter
5 front-panel key or 4
Enter
5 key on the external keyboard.
External disk drive
An external disk drive cannot be connected to HP 4155A/4156A. F
or using a disk drive connected to
external controller, see \Control from External Computer".
1-28

HP 4155A Specifications

General

Brand	HP
Model	4155A
Category	Measuring Instruments
Language	English