Non-supported Commands
The following HP 4145A/B commands are not supported in HP 4145B syntax
command mode:
GL0
Disables HP-GL
GL1
Enables HP-GL overlay graphics
GL2
Enables HP-GL stand-alone graphics
MX
Matrix
SH
Schmoo
SV S
Save ASP le
GT S
Get ASP le
DM3
Display mode Matrix
DM4
Display mode Schmoo
AS1
Auto Sequence Program Start
AS2
Auto Sequence Program Continue
AS3
Auto Sequence Program Stop
If you have HP 4145A/B programs that include any of the above commands
,
they will not work with the HP 4155A/4156A. Please refer to Chapter 2 in
HP-IB Command Reference
of HP 4155A/4156A for details.
5-3