HP Designjet 1050c

Service Tests and Utilities
4-42
HP DesignJets 1050C and 1055CM Printers Service Manual
8. Mon. Mode Baud Sel.
This Service Utility allows you to change the Baudrate of the Serial
Port.
NOTE The default Baudrate for serial communication is 14200.
Change the Baudrate as follows:
1 In the Service Utilities submenu, scroll to "8. Mon. Mode Baud
Sel." and press Enter.
2 When the following message appears on the front panel, you must
select the Baudrate setting using the Up and Down arrow keys.
Press ENTER once you have made your selection.
To p
Enter
Back
↑
↓
Press Enter
Service Utilities
4. Printer Model Type
5. Overdrive cleaning
6. EEROM utilities
7. Printhead check=On
8. Mon. mode baud sel
Make Selection
Top
Enter
Back
↑
↓ Off y
Press Enter
to make selection
MON. BAUDRATE SEL
19200
Change Baudrate