HP Designjet 1050c Service Manual

HP No.80 Ink Supplies Troubleshooting
3-5
HP DesignJets 1050C and 1055CM Printers Service Manual
Some General Precautions When Handling HP No.80
Supplies
CAUTION
Do not touch, wipe or attempt to clean the printhead nozzles. This can
damage the printhead.
Handle the HP No.80 supplies with care. In particular the printhead,
which is a high precision device and must be handled carefully.
n Do not touch the printhead nozzles.
n Do not put the printhead down on the nozzles.
n Do not be rough when handling the printheads. Always set them
down gently.
n Do not drop the printheads.
n Proper handling will assure optimum performance throughout the
printhead life.
n The printhead cleaner should always be handled and stored
upright to avoid a potential spillage of ink.
n Do not touch the end of the ink cartridge which is inserted into
the printer as there may be a small amount of ink on the
connection.
n Avoid storing partially used ink cartridges on their ends.
C6074297a
Do not touch, wipe or attempt
This can damage the printhead.
to clean the printhead nozzles.

HP Designjet 1050c Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	1200 x 600 dpi
Number of Ink Cartridges	4 (Cyan, Magenta, Yellow, Black)
Media Types Supported	Coated, glossy, plain, film, vellum, translucent bond
Maximum Media Size	36 in (914 mm) roll
Ink Types	Dye-based
Connectivity	Parallel
Memory	64 MB
Hard Drive	Not available
Media Sizes Supported	A4, A3, A2, A1, A0, B4, B3, B2, B1, B0
Roll Width	24 in, 36 in
Operating Systems Supported	Windows 2000, XP
Power Requirements	100 to 240 VAC (+/- 10%), 50/60 Hz