Removal and Installation
8-53
HP DesignJets 1050C and 1055CM Printers Service Manual
Tubes System Assembly
Refer to Figure 52 to Figure 63.
Removal
1. Remove the Printheads, Ink Cartridges and the Printhead cleaners.
(Refer to the User’s Guide for details)
.
Figure 52: Printer Carriage Location
WARNING Now turn off the printer with the main power switch at the rear
of the printer.
2. Move the carriage to a position where you can access the printhead
tube connector (Refer to Figure 53).
Figure 53: Printhead Tube Connector
Printer carriage
Printhead
Cleaners
(inside cover)
Ink cartridges
1
To Next Page
Loading...
