HP Designjet 1050c

Removal and Installation
8-58
HP DesignJets 1050C and 1055CM Printers Service Manual
13. Remove the ink cartridge tube connector (item 1) from the rear of
the left hand cover (item 2), rest the assembly on the left hand cover
(refer to Figure 62).
Figure 62: Ink Cartridge Tube Connector (pulled out)
14. Push the tab (item 1) towards you and then push the complete tube
retaining clip (item 2) to the right and then pull towards you (refer to
Figure 63)
Figure 63: Tube Retaining Clip
C607431
1
2
2
1