HP Designjet 1050c Service Manual

Functional Overview
10-18
HP DesignJets 1050C and 1055CM Printers Service Manual
Regulatory Notices
To Obtain a Material Safety Data Sheet (MSDS)
You can obtain current Material Safety Data Sheets for the ink
systems used in the printer by mailing a request to this address:
Hewlett-Packard Customer Information Center, 19310
Pruneridge Avenue, Dept. MSDS, Cupertino, CA 95014, U.S.A.
There is also a web page: http://www.hp.com/abouthp/envrnmnt/
contents/envfacts/hpmsds.htm
Sound
Geräuschemission
(Germany)
LpA < 70 dB, am Arbeitsplatz, im Normalbetrieb, nach DIN 45635
T. 19.
Electro-Magnetic Compatibility (EMC)
FCC Statements
(U.S.A.)
The U.S. Federal Communications Commission (in 47 cfr 15.105)
has specified that the following notices be brought to the attention
of users of this product.
Product Identification Numbers:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Shielded cables
Use of a shielded data cables is required to comply with the Class B
limits of Part 15 of the FCC Rules.
Printer DesignJet 1050C DesignJet 1055CM
Model C6074A C6075A

HP Designjet 1050c Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	1200 x 600 dpi
Number of Ink Cartridges	4 (Cyan, Magenta, Yellow, Black)
Media Types Supported	Coated, glossy, plain, film, vellum, translucent bond
Maximum Media Size	36 in (914 mm) roll
Ink Types	Dye-based
Connectivity	Parallel
Memory	64 MB
Hard Drive	Not available
Media Sizes Supported	A4, A3, A2, A1, A0, B4, B3, B2, B1, B0
Roll Width	24 in, 36 in
Operating Systems Supported	Windows 2000, XP
Power Requirements	100 to 240 VAC (+/- 10%), 50/60 Hz