HP Designjet 1050c Service Manual

Service Tests and Utilities
4-32
HP DesignJets 1050C and 1055CM Printers Service Manual
2. Release Info
This Service Utility provides information on the current Firmware
version.
Check the Release Info as follows:
1 In the Service Utilities submenu, scroll to "2. Release Info" and
press Enter.
2 The Printer will display the Firmware information. An example is
shown below.
To p
Enter
Back
↑
↓
Press Enter
Service Utilities
3. Set Asian PS Font
4. Printer Model Type
5. Overdrive Cleaning
1. Tubes Purge
2. Release Info
Make Selection
2. Release Info.
Rel: A.01.02
Date: Oct 27 1998
Time: 12:20:02
BChann: No

HP Designjet 1050c Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	1200 x 600 dpi
Number of Ink Cartridges	4 (Cyan, Magenta, Yellow, Black)
Media Types Supported	Coated, glossy, plain, film, vellum, translucent bond
Maximum Media Size	36 in (914 mm) roll
Ink Types	Dye-based
Connectivity	Parallel
Memory	64 MB
Hard Drive	Not available
Media Sizes Supported	A4, A3, A2, A1, A0, B4, B3, B2, B1, B0
Roll Width	24 in, 36 in
Operating Systems Supported	Windows 2000, XP
Power Requirements	100 to 240 VAC (+/- 10%), 50/60 Hz