HP Designjet 1050c Service Manual

Print Quality
6-15
HP DesignJets 1050C and 1055CM Printers Service Manual
Problems with Color-to-Color Alignment
Description of problem
When you look at the image you have printed:
n The colored lines are printing double and they are the wrong
colors,
n The borders of colored blocks are overlapped and the overlapping
areas have different colors in them.
n Vertical lines are mis-aligned or fuzzy (not smooth)
How to solve the problem
1 Make sure you have paper loaded (not clear film, tracing paper or
vellum).
C6074286
C6074287
C6074304

HP Designjet 1050c Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	1200 x 600 dpi
Number of Ink Cartridges	4 (Cyan, Magenta, Yellow, Black)
Media Types Supported	Coated, glossy, plain, film, vellum, translucent bond
Maximum Media Size	36 in (914 mm) roll
Ink Types	Dye-based
Connectivity	Parallel
Memory	64 MB
Hard Drive	Not available
Media Sizes Supported	A4, A3, A2, A1, A0, B4, B3, B2, B1, B0
Roll Width	24 in, 36 in
Operating Systems Supported	Windows 2000, XP
Power Requirements	100 to 240 VAC (+/- 10%), 50/60 Hz