HP ProLiant BL280c - G6 Server Datasheet

Management Processor Lite 384
Table 16-2 Class: SMX_ManagementProcessor
Property name
Property implementation
OperationalStatus Enumerators indicating the Management Processor
operational status (refer to OperationalStatus mapping
table in HP Management Processor (MP) Lite Profile for
specific descriptions of when each value is populated).
•
OperationalStatus[0] contains MP operational
status:
○
0 (Unknown), when NICCondition=0
○
2 (OK), normal operation
○
3 (Degraded), when NICCondition=5
○
6 (Error), when NICCondition=6 or MP
software interface fails
•
OperationalStatus[1] contains NIC status (when MP
is enabled):
○
0 (Unknown), when NICCondition=0 or MP
software interface fails
○
2 (OK), normal operation
○
3 (Degraded), when NICCondition=5
○
6 (Error), when NICCondition=6
○
10 (Stopped), when NICCondition=3
○
15 (Dormant), when NICCondition=4
Note: When a Management Processor is disabled
(refer to property EnabledState) OperationalStatus[0]
will always report a status of 2 (OK) so as not to
contribute negatively to overall system status. An MP is
disabled only if the user has manually disabled it
through the MP’s RBSU settings; this is seen as a
“normal” condition. In this scenario
OperationalStaus[1] is not populated.
StatusDescriptions Descriptive text per OperationalStatus.
•
StatusDescriptions[0] text per OperationalStatus[0]:
○
Management Processor Status: Unknown
○
Management Processor Status: OK
○
Management Processor Status: Degraded
○
Management Processor Status: Error
•
StatusDescriptions[1] text per OperationalStatus[1]:
○
Management Processor NIC Status: Unknown
○
Management Processor NIC Status: OK
○
Management Processor NIC Status: NIC is
disabled
○
Management Processor NIC Status: Not in use,
MP is utilizing host NIC
○
Management Processor NIC Status: NIC
disconnected
○
Management Processor NIC Status: NIC failed

HP ProLiant BL280c - G6 Server Specifications

General

Brand	HP
Model	ProLiant BL280c - G6 Server
Category	Software
Language	English