• Decompression error ID
• Time the error occurred
• sDev Number
• LBA
• Offset
• Length
• UUID
• IP address
• Enclosure number
• Range of suggested disk numbers within the enclosure
• Part number of the faulty drive
Jobs are only logged in event of a job failure. The data fields are in order as follows:
• Job — indicates that this row of data is the job information
• Job ID
• Date of the test
• Generated job key
• Test start time
• Time of last update to the job
• Test end time
• Number of the storage pool tested
• Total amount of data written during the test at this point
• Direction — read or write
• Result — success or fail
• Message, if any, associated with the failed job
• External connect error, if any
• Source barcode of the job
• Target barcode of the job
Monitoring212
To Next Page