Huawei FusionModule2000 - Page 156

FusionModule2000 Smart Modular Data Center
Product Description
8 Intelligent Module Management System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
148
Item
Specifications
Wireless
communication
Supports wireless communication that complies with
IEEE802.15.4.
4G
Supports the 4G module. The ECC800-Pro supports short message
service (SMS) message sending and 4G communication, is
compatible with 3G (WCDMA) communication, and provides a
standard SIM card slot.

4G: Wireless mode (FDD-LTE, TDD-LTE). Coverage band
(B1, B3, B5, B7, B8, B20)

3G: Wireless mode (WCDMA). Coverage band (B38, B40,
B41)

2G: Wireless mode (GSM). Coverage band (900/1800MHz)
NOTE
The prerequisite for using a SIM card is that the site has signal coverage.
USB

Supports USB 2.0 and 5 V, 1 A power supply.

After installing the WiFi module, connect the WiFi module to
the ECC800-Pro using the app on the mobile phone or tablet
computer to view the basic information about the smart module,
such as layout, resources, energy efficiency, environment, and
alarms.

You can insert a USB flash drive to export historical data and
configuration files and import configuration files.
SW Button

Restoring the default IP address, factory settings, and user
information.

Supports RF_Z networking.
Table 8-5 ECC800-Pro RF_Z parameters
Item
Specifications
RF_Z Operation
Frequency
2405–2480 MHz
RF_Z EIRP
(max.)
8 dBm
Table 8-6 ECC800-Pro 4G parameters
Item
Specifications
3G/4G Operation
Frequency
LTE (FDD): BAND1, BAND2, BAND3, BAND4, BAND5, BAND7,
BAND8, BAND20
DC-HSPA+/HSPA+/HSPA/UMTS: 850/900/1900/2100 MHz
GSM/GPRS/EDGE: 850/900/1800/1900 MHz