Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description
8 Intelligent Module Management System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
153
Indicator
Color
Name
Status
Description
indicator
generated.
Off
The system is normal.
RF_Z
Green
Communic
ation status
indicator
Blinking at
long
intervals
A network is set up, and no node
access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and
then off for 1s).
Blinking at
super short
intervals
A network is set up, and node
access is allowed (the indicator
blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
SW Button
Table 8-15 SW button description
Function
Description
Operation Description
Indicator Status
Wireless network
RF_Z (802.15.4)
pairing
In non-wireless network (802.15.4)
pairing mode, press and hold down the
button for 3s to 5s to enter the wireless
network pairing mode.
The RF_Z indicator is
blinking at super short
intervals.
In wireless network (802.15.4) pairing
mode, press and hold down the button for
3s to 5s to exit the pairing mode; or the
system automatically exits the pairing
mode after 30 minutes without pressing
the button.
The RF_Z indicator is
blinking at long
intervals.
Press and hold down the button for more
than 8s to 20s to clear network
parameters.
The RF_Z indicator is
blinking at super short
intervals.
Turning on WLAN
Press the button for less than 3s to turn on
the WLAN service.
None
Restoring the
default IP address,
factory settings,
and user
information
Hold down for 1 minute
None

Huawei FusionModule2000 Specifications

General

Brand	Huawei
Model	FusionModule2000
Category	Storage
Language	English