Huawei FusionModule2000 - Installing Power Supply and Distribution Devices; (Optional) Installing Batteries

FusionModule2000 Smart Modular Data Center
Product Description
8 Intelligent Module Management System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
177
Indicator
Color
Name
Status
intervals: The access
actuator successfully
registers with the
ECC800-Pro and the
software runs
properly (the
indicator blinks at 0.5
Hz, on for 1s and
then off for 1s).

Blinking at short
intervals: The
communication is
disconnected or the
access actuator fails
to register with the
ECC800-Pro (the
indicator blinks at 4
Hz, on for 0.125s and
then off for 0.125s).

Blinking: The
indicator blinks at
super short intervals
for 0.5s (blinking at
10 Hz, on for 0.05s
and then off for
0.05s) and then turns
off for 0.5s. The
cycle lasts for 5s.
ALM
Red
Alarm indicator

Steady on: A system
failure alarm is
generated.

Off: No system alarm
is generated.
RF_Z
Green
Wireless
communication status
indicator

Steady on: No
network parameters
exist, or a network is
to be created.

Blinking at long
intervals: A network
is set up, and no node
access is allowed (the
indicator blinks at 0.5
Hz, on for 1s and
then off for 1s).

Blinking at super
short intervals: A
network is set up, and
node access is
allowed (the indicator
blinks at 10 Hz, on