Figure 3-11 Installing the server
3. After the server is installed, push the server inwards until you hear a sound,
and ensure that the latches eject and completely block the screws to ax the
server to the inner guide rails. See (2) in Figure 3-11.
4. Press the release buttons on both sides and push the server into the cabinet
until the mounting ears are in close contact with the mounting bars of the
cabinet. See (1) and (2) in Figure 3-12.
RH2288H V3 Server
User Guide 3 Installing and Removing the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 91
To Next Page
Loading...
