Step 11 Locate the cables connecting the mainboard and the front hard disk backplane to
the DVD drive, and disconnect the cables from the mainboard and the front hard
disk backplane. For details, see 2.7 Internal Cabling.
Step 12 Use a Phillips screwdriver to unscrew the DVD drive panel. See step (1) in Figure
7-50.
Figure 7-50 Removing the DVD drive panel
Step 13 Remove all cables from the DVD drive. See step (1) in Figure 7-51.
Figure 7-51 Removing the DVD drive from a server with eight 3.5-inch hard disks
Step 14 Hold down the plastic latch on the DVD drive, and push the DVD drive outwards
to remove it from the chassis. See steps (2) and (3) in Figure 7-51.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 193
To Next Page
Loading...
