Figure 7-73 Installing the supercapacitor (LSI SAS3108)
1. Insert the TFM vertically into the RAID controller card. See (3) in Figure 7-73.
2. Tighten the screws on the TFM. See (4) in Figure 7-73.
3. Connect the cable between the supercapacitor and the TFM. See (2) in Figure
7-73.
Insert the connector with pins to the TFM socket.
If the chip model of the RAID controller card is PM8060, see the following gure.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 216
To Next Page
Loading...
