Huawei RH2288H V3 - Page 242

Table 7-3 DIMM conguration rules
CPU DIMM Installation Sequence
CPU 1 000(A), 010(B), 020(C), 030(D), 001(E), 011(F), 021(G),
031(H), 002(I), 012(J), 022(K), 032(L)
CPUs 1 and 2 000(A), 100(A), 010(B), 110(B), 020(C), 120(C), 030(D),
130(D), 001(E), 101(E), 011(F), 111(F), 021(G), 121(G),
031(H), 131(H), 002(I), 102(I), 012(J), 112(J), 022(K),
122(K), 032(L), 132(L)
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the DIMM to be replaced or remove the DIMM
ller from the slot where
a new DIMM is to be installed.
The method for removing a DIMM
ller is the same as that for removing a DIMM.
For details, see 7.41 Removing a DIMM.
Step 3 Take the spare DIMM out of the memory riser box.
Step 4 Simultaneously press the DIMM ejectors outward. See Figure 7-91.
Figure 7-91 Opening the DIMM ejectors
Step 5 Align the DIMM with the DIMM slot, and insert the DIMM into the slot. Press
down on the DIMM with your thumbs until it snaps into place. See Figure 7-92.
The two latches pop up into place automatically.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 229