Figure 2-9 Rear panel of the RH2288H V3
1 PSU 1 2 PSU indicator
3 Power socket for a PSU 4 I/O module 2 (providing slots 6 to 8
from top to bottom) or NVMe PCIe
SSD adapter (corresponding to CPU
2, providing slots 6 and 7 from top to
bottom)
5 Connection status indicator 6 Data transmission status indicator
7 Onboard PCIe slots
(numbered 4 and 5 from
left to right)
8 I/O module 1 (providing slots 1 to 3
from top to bottom)
9 FlexIO card 10 UID indicator
11 USB 3.0 port 12 Management network port
13 VGA port 14 Serial port
15 PSU 2 - -
● Items 4 and 8 in Figure 2-9 can be equipped with riser cards, or rear 2.5-inch or 3.5-
inch drives (2.5-inch and 3.5-inch drives can be congured together).
● If the server is equipped with a front drive backplane connecting twelve 3.5-inch drives,
you can install a maximum of four 3.5-inch or 2.5-inch drives at the rear. Both items 8
and 4 in Figure 2-9 can be equipped with two drives.
● If the server is equipped with a front drive backplane connecting
twenty-ve 2.5-inch
drives, you can install a maximum of three 3.5-inch or 2.5-inch drives at the rear. Item 8
in Figure 2-9 can be equipped with two drives, and item 4 can be equipped with only
one drive in the upper slot.
● If item 8 is equipped with two drives, the drives are numbered A0 and B0 from top to
bottom. If item 4 is equipped with two drives, the drives are numbered A1 and B1 from
top to bottom.
FlexIO Cards
The RH2288H V3 supports the following models of FlexIO cards:
RH2288H V3 Server
User Guide 2 Overview
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 13
To Next Page
Loading...
