Figure 7-152 Installing the VGA board on a server with eight 2.5-inch hard disks
Step 5 Tighten the screws to secure the VGA board to the tray. See step (2) in Figure
7-152.
Step 6 Connect cables to the VGA board.
Step 7 Push the tray into the chassis in the arrow direction. See Figure 7-153.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 284
To Next Page
Loading...
