● The drive letters vary depending on the type of the storage media. Conrm the drive
letter of the storage medium before erasing data from it.
● The data erase operation takes time.
● If the badblocks -swft 0 command fails, contact Huawei technical support.
Step 5 Remove the drive. For details, see 7.5 Removing a Drive.
After the data is cleared, do not restart or reinstall the server. Otherwise, the system will
reload data to the drives during the startup of the server.
----End
Removing Data from a microSD Card by Using Toolkit
The following describes how to clear data on a microSD card as an example.
Step 1 Log in to the iBMC WebUI, choose Congure > Boot Option, set the boot
medium to DVD-ROM, and click Save.
The Boot Option page is displayed.
Step 2 Open the Remote Virtual Console.
Step 3 Click on the toolbar.
The screen shown in Figure 9-17 is displayed.
Figure 9-17 Virtual DVD-ROM drive
Step 4 Select Image File and click Browse.
The Open dialog box is displayed.
Step 5 Select FusionServer Tools-Toolkit-Vxxx.iso, and click Connect shown in Figure
9-17.
Step 6 Click on the toolbar.
The menu shown in Figure 9-18 is displayed.
Figure 9-18 Power control
RH2288H V3 Server
User Guide 9 Common Operations
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 321
To Next Page
Loading...
