The silkscreen slot numbers for the standard PCIe cards of some models are Port 0 and Port
1, which correspond to Port A and Port B respectively.
Table 2-10 shows the mapping between the slot numbers in the LSI Logic SAS
BIOS CU and the panel silkscreens when the RH2288H V3 is
congured with a
front 24-drive backplane and two RAID controller cards.
Table 2-10 Mapping between the slot numbers in the LSI Logic SAS BIOS CU and
the panel silkscreens (2 RAID controller cards)
Adapter No. in the CU Slot No. in the CU Panel Silkscreen
0 Slots 0–7 0–7
1 Slots 0–7 8–15
● For cable connections of RAID 0, see (4) and (5) in Figure 2-31.
● For cable connections of RAID 1, see (2) and (3) in Figure 2-31.
Internal Cabling for a Server with Three RAID Controller Cards
The RH2288H V3 does not support rear drives if it is
congured with three RAID
controller cards, including two in standard PCIe slots and one on the mainboard.
Figure 2-32 Internal cabling for a server with three RAID controller cards
No.
Description BOM Number
1 Signal cable for connecting the
indicator plate of the right mounting
ear to the mainboard (J43)
04051026
RH2288H V3 Server
User Guide 2 Overview
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 60
To Next Page
Loading...
