Input/Output Option Connector Pin-Out Description 91
User Guide v 1.4 — September 2015 System Options
11.3.4 Input/Output Option Connector Pin-Out Description
Below is the connection detail for all of the optional Inputs and Outputs
Table 11-7 Optional Inputs
Option Inputs (Female) Pins Wire Colors
Remote Standby Input C - D red, blue/red
Remote Boost Input A - B green, orange/green
Remote Start Input E - F orange, orange/black
Remote Stop Input G - H black, blue/black
Remote Manual Boost Input T - U black/red, red/black
Table 11-8 Optional Outputs
Option Outputs (Male) Pins Wire Colors
Alarm Error Output G - H black, blue/black
Priority Control Mode Output C - D red, blue/red
System At Temperature Output A - B green, orange/green
System At Boost Temperature Output J - K white, blue/white
Run Status Light Output L - M red/green, orange/red
CAN Communications Error Output Z - a white/red/black, red/white/black
Remote Standby Output E-F orange, orange/black
Max Temp Error Output T-U black/red, red/black
Mold Cooling Enable Output N-P black/white, white/black
At Standby Temperature Output R-S green/white, black/red/white
To Next Page
Loading...
