v 1.4 — September 2015 Altanium Neo2
96 Viewing the SPI Communications Monitor
11.6.1 Viewing the SPI Communications Monitor
This screen can be used to monitor communications traffic. The screen displays transmit,
receive, error and status information for diagnostic purposes.
To view the SPI Communications Monitor:
1. Touch OPTIONS, then the SPI to open the SPI Communication screen.
2. Touch SPI MONITOR to open the SPI Communications Monitor screen.
The screen is color coded to indicate the date type.
• Yellow - SPI protocol status
• Blue - Data Error
• White - Transmitted data
• Black - Received data
Figure 11-6 SPI Communications Monitor Screen
Table 11-10 SPI Communications Monitor
Button Description
RESET Touch to reset the SPI channel.
OK Touch OK to exit the screen.
To Next Page
Loading...
