Husky Altanium Neo2 - Access the Customize Screen; Customizing the Display

Access the Customize Screen 69
User Guide v 1.4 — September 2015 System Setup and Customization
To set the monitor regulation:
1. On the Advanced System Setup screen, the MONITOR REG button displays the setting.
2. Touch MONITOR REG to toggle the setting between YES and NO. The default setting is
NO.
9.2.9 Access the Customize Screen
To access the Customize screen:
On the Advanced System Setup screen, touch CUSTOM. Refer to Section 9.3 for details.
9.3 Customizing the Display
This feature allows the administrator to customize the screens displayed during the boot-up
sequence and the zone parameters that are available in the Quick Set screen.
To access the Customize screen, on the Advanced System Setup screen, touch CUSTOM.