Exporting a Mold Setup 35
User Guide v 1.4 — September 2015 Mold Setups
6.5.2 Exporting a Mold Setup
To export a mold setup:
1. Insert a USB disk to the USB port.
2. On the Mold Setup Import/Export screen, touch the Mold Setup number from the
INTERNAL MOLD SETUPS list to select the mold setup file you want to export.
3. Touch COPY. Once selected the COPY button is greyed out and the number button for
the selected setup turns magenta and a C replaces the number.
4. Touch the Mold Setup number in the USB MOLD SETUPS list to select the destination
mold setup file location.
5. Touch PASTE and the file is copied to the new destination.
6.5.3 Exporting All Mold Setups
To export all mold setups:
1. Insert a USB disk to the USB port.
2. On the Mold Setup Import/Export screen, touch COPY ALL. Once selected the COPY
ALL button is greyed out and the number buttons for the selected setups turns
magenta and a C replaces the numbers.
3. Touch PASTE ALL and all the files are copied to the USB disk.
6.5.4 Deleting a Mold Setup from a USB Disk
To delete a mold setup from the USB disk:
1. Touch the Mold Setup number from the USB MOLD SETUPS list to select the mold setup
file you want to delete.
2. Touch DELETE. The selected files are permanently deleted.
To Next Page
Loading...
