Purpose of the Equipment 3
User Guide v 1.4 — September 2015 Introduction
1.2 Purpose of the Equipment
Husky controllers are designed to control the process temperature for injection molding
applications only.
Contact your nearest Husky Regional Service and Sales office if you plan to use a Husky
product for anything other than its intended use.
1.3 Restrictions of Use
Husky injection molding equipment must never be:
• used for any purpose other than that described in Section 1.2, unless otherwise
approved by Husky
• operated or serviced by personnel unfamiliar with the inherent risks and necessary
precautions related to controllers
1.4 General Safety
Safety Symbol General Description of Symbol
General
This symbol indicates a potential personal injury hazard. It is usually
accompanied by another pictogram or text to describe the hazard.
Hazardous Voltage
This symbol indicates a potential hazard that may cause death or serious injury
and will appear on any panel that, if removed, will expose the user to more
than 40 VAC.
WARNING!
Electrical shock risk - de-energize controller prior to connecting, disconnecting or
servicing the controller, hot runner or mold.
To Next Page
Loading...
