Husky Altanium Neo2 - Printing the Error Log to File

Printing the Error Log to File 79
User Guide v 1.4 — September 2015 System Setup and Customization
2. Touch OK to return to the Home screen.
9.5.4 Printing the Error Log to File
Refer to Section 4.4.
Figure 9-10 Error Log Screen
Error Log Column
Heading
Description
# The error number listed from newest to oldest.
ZN Zone number
DATE Date the alarm occurred.
TIME Time the alarm occurred.
MD Mold setup at the time the alarm occurred.
SET The setpoint at the time the alarm occurred.
ACT The actual temperature at the time the alarm occurred.
SYSTEM The status of the system at the time the alarm occurred.
STATUS The actual alarm that occurred on the zone.