Husky Altanium Neo2 - Entering a Password; Changing a Password

v 1.4 — September 2015 Altanium Neo2
26 Entering a Password
5.1 Entering a Password
Factory set passwords; (Level 1 and 2) are shipped in a sealed envelope along with the
controller. These passwords should be kept in a secure place.
To enter your password:
1. Touch ENTER PSWD.
2. On the numerical key window, touch the numbers on the keypad, and then touch Enter.
The present level will change based on the code you entered. The system will power up with
the Default security level selected in the Security window. Look at the Current Level on the
Security screen and your entered level should be displayed.
5.2 Changing a Password
To change the password for Level 1 or 2:
1. Enter the level 2 password.
2. Touch the CHANGE LVL 1 to change the level 1 password or the CHANGE LVL 2 to
change the level 2 password.
1 Touch this button to change the selected function to security level 1.
2 Touch this button to change the selected function to security level 2.
Button Description
Figure 5-2 Numerical Key Window
1. Enter Button